Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Silver Lakes, CA
Chimney repair in Silver Lakes usually comes down to two things: wind damage and age. Homes here were mostly built between the late 1970s and early 2000s as part of a master-planned golf-course community around two man-made lakes, which means a lot of prefab fireplace units and masonry chimneys are now hitting the 30-to-45-year mark at the same time. We handle crown repair, flashing leaks, cap replacement, and liner work on this older housing stock every week, and we’re set up to assess the whole flue rather than just documenting a problem and leaving you to find someone else to fix it. Call (833) 805-3229 when you need a chimney company in Silver Lakes that repairs, not just sweeps.
Why Silver Lakes Homes Are Different
Silver Lakes sits in the high desert of San Bernardino County, where hot dry summers and persistent wind meet cold winter nights with fires lit only a handful of times each season. That pattern changes how chimneys fail here. Creosote builds up slowly, but it sits undisturbed for months, hardening into a glaze that a standard brushing won’t remove. At the same time, Santa Ana wind events drive sand, dust, and debris into uncapped flues, especially on the more exposed lake-side lots. We regularly pull desert bird nests, twigs, and wind-blown grit out of flues that haven’t seen a fire in a year. The housing stock compounds the issue: stucco-on-wood-frame homes from the 1980s and 1990s often have factory-built prefab fireplaces that were never designed to outlast four decades of desert temperature swings. Masonry chimneys, where they exist, show crown cracking and flashing separation from years of high UV and thermal expansion. Silver Lakes isn’t a heavy wood-burning community the way mountain towns are; it’s a seasonal-use community where systems sit idle and degrade in the dry, gritty air. Inspection matters as much as sweeping here, because a flue that hasn’t been used may have been occupied by wildlife or compromised by weather without anyone noticing.
Styles & brands we work with





Our Main Silver Lakes Services
Most homeowners in Silver Lakes reach out first for the two services that keep their homes safe and efficient, and we handle both under one call.
Chimney Sweep in Silver Lakes
A proper chimney sweep in Silver Lakes means removing desert dust and grit as well as creosote, then checking the flue with a camera so you can see what’s actually happening inside. In this community, a chimney that hasn’t been lit for eight or nine months often has a nest, a blockage, or a glaze of hardened creosote that won’t come out without the right tools. We treat the sweep as half the job and the inspection as the other half, because on 1980s and 1990s prefab units, the problem is often in the liner or the chase, not just the visible firebox. Chimney Sweep in Silver Lakes covers what we find and how we do the work, including the camera report you get afterward.

Dryer Vent Cleaning in Silver Lakes
Dryer vent cleaning in Silver Lakes is a fire-safety service on equal footing with chimney work, not an afterthought. Desert dust, lint, and dry air combine to make clogged dryer vents here ignite more easily than in coastal climates, and long vent runs through 1980s floor plans mean lint has more pipe to collect in. We clean the full run from the dryer to the exterior termination, check the vent cap, and use Famco-supplied components when a section needs replacing. If your dryer takes two cycles to dry a load, the vent is already telling you something. Learn what this service involves at Dryer Vent Cleaning in Silver Lakes.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Silver Lakes
Chimney repair in Silver Lakes is most often driven by water entry, wind damage, and liner deterioration. On homes built between the late 1970s and early 2000s, cracked chimney crowns, failed flashing, and absent or damaged caps let desert rain and wind-blown debris into the flue and the chase, and once water gets in, the damage compounds through freeze-thaw cycles every winter. We repair the entire system, from the crown at the top to the liner inside, using professional-trade materials from DuraFlex, Olympia Chimney, Gelco, and Copperfield, the same products certified chimney contractors specify nationwide. For a full picture of what we repair and how, see our Chimney Repair service page. In Silver Lakes, the most common repair calls we receive are chimney cap installation/replacement and chimney crown repair, followed closely by liner installation when a prefab flue from the 1980s has finally given out.
Chimney Cap Installation
Signs you need it
You can see daylight or rain entering through an open flue, birds are nesting in the chimney, or Santa Ana winds push downdrafts and sand into the home.
What it costs in Silver Lakes
A chimney cap with installation in Silver Lakes typically runs $200 – $400 for standard stainless steel, depending on flue size and roof access.
How we do it
We measure the flue, select a stainless cap matched to the tile or prefab diameter, secure it to the crown, and seal the attachment points so wind can’t lift it.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, warped, or missing entirely after a storm, or it no longer fits because the crown has eroded around it.
What it costs in Silver Lakes
Replacing a failed chimney cap in Silver Lakes typically costs $300 – $500 installed, including removing the old cap and confirming the flue is clear.
How we do it
We remove the damaged cap, inspect the flue opening and crown for associated damage, install a correctly sized replacement, and verify the seal.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracks, gaps, or spalling in the existing liner, or a prefab fireplace from the 1980s or 1990s has a flue that can no longer safely carry exhaust.
What it costs in Silver Lakes
Chimney liner installation in Silver Lakes typically runs $2,500 – $5,000 including materials and labor for a standard single-story home, depending on the liner type and flue length.
How we do it
We run a DuraFlex flexible liner system sized to the appliance, insulate and secure it, and connect the appliance so the flue meets current fire-safety standards.
Chimney Flashing Repair
Signs you need it
Water stains appear on the ceiling or wall around the chimney after rain, or you can see lifted, rusted, or missing flashing where the chimney meets the roof.
What it costs in Silver Lakes
Chimney flashing repair in Silver Lakes typically costs $300 – $700 depending on how much flashing needs replacing and how the roof ties into the chimney.
How we do it
We remove failed flashing, install new step and counter flashing, seal with high-temperature roofing sealant, and verify the transition sheds water properly.
Chimney Crown Repair
Signs you need it
The crown has visible cracks, is crumbling at the edges, or holds standing water after rain instead of shedding it away from the flue.
What it costs in Silver Lakes
Chimney crown repair in Silver Lakes typically runs $600 – $1,500, depending on whether we can patch the crown or need to rebuild and reseal it.
How we do it
We clean the crown, fill cracks with a flexible crown sealant, and when needed, pour a new reinforced crown with a proper drip edge to protect the masonry below.
What Chimney Repair Costs in Silver Lakes
| Item | Typical range in Silver Lakes |
|---|---|
| Chimney cap with installation | $200 – $400 |
| Chimney cap replacement | $300 – $500 |
| Chimney liner installation | $2,500 – $5,000 |
Does a cracked chimney crown really need repair right away?
Yes. A cracked crown lets water into the masonry and freeze-thaw cycles in Silver Lakes winter nights widen those cracks fast, turning a $600 repair into a $3,000 rebuild within a season or two. Call (833) 805-3229 for an exact quote.
Can you reline my chimney without tearing out the old one?
Yes. A DuraFlex liner slides down through the existing flue and locks in as a new, sealed passage, so we don’t need to demo your masonry or prefab chase. In many Silver Lakes homes, this solves the problem in one day.
Brands We Service in Silver Lakes
We repair and restore chimneys in Silver Lakes using parts from Olympia Chimney, Famco, Copperfield, and DuraFlex. These are professional-trade brands, available through the industry supply chain, not retail racks. Common replacement parts for Silver Lakes homes, including caps, flashing, and liner components, run fast because we keep them in normal stock. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Silver Lakes, CA
| Service | Typical range in Silver Lakes |
|---|---|
| Chimney sweep and inspection | $180 – $340 |
| Dryer vent cleaning | $110 – $260 |
| Chimney cap with installation | $200 – $400 |
| Chimney cap replacement | $300 – $500 |
| Chimney flashing repair | $300 – $700 |
| Chimney crown repair | $600 – $1,500 |
| Chimney liner installation | $2,500 – $5,000 |
| HeatShield liner restoration | $900 – $1,800 |
Prices in Silver Lakes rise with roof pitch, flue height, and how long the system has gone without maintenance; a flue that hasn’t been touched since the 1990s often needs more than a standard sweep. We give you a fixed figure before we start the work, and the price we quote is the price you pay.
Neighborhoods We Serve in Silver Lakes
We cover every ZIP code in the Silver Lakes community, 92342, from the lake-side streets to the outer fairway-facing loops and the surrounding unincorporated lots.
- North Lake
- South Lake
- Fairway Drive area
- Cottonwood area
- Mojave River side
Most Silver Lakes jobs can be scheduled within a few days of your call, and we group appointments by area so we can offer tighter windows when your schedule is specific.
Service Area – Cities Near Silver Lakes
Ashwood Chimney Sweep works throughout the High Desert and the surrounding communities, so if you’re outside Silver Lakes proper, we still likely cover your area. We regularly serve Adelanto, CA, Victorville, CA, Mountain View Acres, CA, and Spring Valley Lake, CA. If you’re not sure whether your address falls in our service area, call (833) 805-3229 and we’ll confirm it on the spot.
Serving Silver Lakes, CA — Our Local Coverage Area
We’re based in the Silver Lakes area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Silver Lakes
Most Silver Lakes appointments are scheduled within a few days, and during the fall pre-season we run a full schedule so you’re not competing for a slot in November. Call (833) 805-3229 and we’ll give you the next available window.
Most repair and sweep work falls under routine maintenance and doesn’t need HOA approval, but if your project changes the exterior appearance, like a visible cap change, we can note the specs you’d need for a quick check with your association.
Yes, we clean and inspect both in a single visit. That matters in Silver Lakes because desert dust loads dryer vents as fast as it loads flues, and treating both at once costs less than two separate trips.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Silver Lakes Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Alejandro Garcia"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Paul Padgett"They were the only ones willing to just tell me the price. Everyone else wanted to "come take a look" first, which in my experience means come apply pressure in person."
— Marisol Salazar