Dryer Vent Cleaning in Fontana — One Flat Price, You See What We See

Trusted Dryer Vent Cleaning for Fontana Homeowners

A clogged dryer vent is a fire hazard hiding in plain sight. In Fontana, where the Santa Ana winds push dry air through the Inland Empire and families run dryers year-round, lint buildup turns a routine laundry load into a house-fire risk. We’ve cleaned thousands of dryer vents across Fontana, Bloomington, and Rialto, and the story is usually the same: the vent looks fine from the outside, but the inside tells a different story. Norm Castillo started Ashwood Chimney Sweep to treat dryer vent cleaning as a serious fire-safety service, not an upsell. Call (833) 805-3229 to schedule a cleaning, and we’ll inspect what’s actually happening inside your vent line.

Call (833) 805-3229

If you’re searching for Dryer Vent Cleaning in Fontana, you’re probably wondering whether your vent is clogged, what a cleaning costs, and whether it can wait. We’ll answer those questions directly and tell you what we find, not what sells.

What Our Dryer Vent Cleaning Service Includes

Every dryer vent cleaning we perform in Fontana starts with the same principle: we clean the entire vent run, from the dryer connection to the exterior termination point. A partial cleaning just pushes lint deeper into the line. We don’t do partial work. Here’s what’s included, step by step.

Full-Line Lint Removal

Lint collects where you can’t see it: in the transition duct behind the dryer, in the elbows and bends of the vent pipe, and at the exterior vent hood where the flap gets stuck open or closed. We run professional rotary brushes through the full length of the vent line to dislodge packed lint, not just vacuum the first few feet. Most Fontana homes have vent runs between 5 and 20 feet, and we clean every foot of it. After the rotary pass, we vacuum the line to remove the loosened debris.

Exterior Vent Hood Inspection and Cleaning

The vent hood on the outside of your Fontana home is where most blockages start. Birds build nests in the hood in spring, and the Santa Ana winds blow dust and debris against the flap, jamming it open or shut. We remove the hood cover, clear any nesting material or debris, and test the flap to make sure it opens freely when the dryer is running and seals when it’s off. A hood that won’t seal lets hot Fontana air into the vent line and gives pests a direct path into your laundry room.

Airflow Verification

After cleaning, we measure the actual airflow coming out of the vent termination with a professional airflow meter. A clean vent should move air at a specific velocity depending on the dryer model and vent length. If the airflow is still weak after cleaning, we’ll tell you, because that means there’s a secondary problem: a crushed flex hose, a disconnected joint, or a vent run that’s too long for the dryer’s blower. We don’t declare the job done until we’ve verified the air is moving.

Dryer Transition Hose Replacement (When Needed)

The flexible hose connecting your dryer to the wall is called the transition duct, and it’s the most common failure point in Fontana homes. Cheap foil hoses sag, kink, and trap lint. If yours is crushed, torn, or made of flammable foil rather than rigid or semi-rigid material, we’ll recommend replacement with a UL-listed rigid aluminum or semi-rigid duct. The fix is fast and inexpensive compared to the fire risk of a damaged hose, and we stock the materials on the truck so it’s done in one visit.

Dryer Performance Check

Once the vent is clean, we run your dryer through a short cycle to confirm it’s drying properly. Long drying times are the most common complaint we hear from Fontana homeowners, and after a full vent cleaning, most dryers return to complete cycle times. If your dryer still takes two cycles to dry a load after we’ve cleaned the vent, we’ll tell you, because that points to an appliance problem, not a vent problem. Either way, you’ll know exactly where you stand.

Brands We Service for Dryer Vent Cleaning

We maintain and clean dryer vent systems for every major residential dryer brand: Whirlpool, Maytag, LG, Samsung, GE, Kenmore, Electrolux, and Speed Queen. Each brand has its own venting specifications, and we’re familiar with the differences: Samsung and LG dryers typically have higher airflow requirements that make clean vents even more critical, while older Kenmore and Whirlpool models often have shorter, convoluted vent runs that trap lint faster. We work on the vent system regardless of dryer brand, and we service gas and electric dryers alike.

Our vent components come from Famco, a manufacturer of commercial-grade ventilation hardware, not improvised parts from the hardware store. When we replace a vent hood, a connector, or a wall cap, we use components engineered for the job. The same applies to our chimney work, where we source materials from Olympia Chimney, Copperfield, and DuraFlex, but for dryer vents, Famco hardware gives us fittings that fit right, seal tight, and last. Whether you have an LG front-loader, a Samsung top-of-line model, or any other make, we can service it.

Signs You Need Dryer Vent Cleaning Right Now

• Clothes take two or more cycles to dry. If a full load used to dry in 45 minutes and now takes 90, the vent is restricted. The dryer is producing heat, but the moisture has nowhere to go, so the dryer keeps running and your energy bill climbs. In Fontana, where summer temperatures already strain home cooling systems, a dryer running twice as long is wasted money every single load.
• The dryer feels hot to the touch on the outside. A dryer that’s warm during operation is normal. A dryer that’s hot enough to feel through the top or sides is not. That heat means the exhaust is backing up inside the appliance, and that’s exactly how lint fires start. If the laundry room itself feels warmer or smells like burnt dust when the dryer runs, the vent needs cleaning now.
• The exterior vent flap doesn’t open when the dryer is running. Stand outside your Fontana home while the dryer runs and check the vent hood. The flap should be pushed open by the exhaust air. If it’s barely moving, or not moving at all, the vent is clogged or the flap is stuck. Either way, hot, humid air is staying inside the vent line, which is the problem you’re trying to prevent.
• You can’t remember the last time the vent was cleaned. If you have to think about it, it’s been too long. The National Fire Protection Association recommends dryer vent cleaning at least once a year, and more often for large households. Most Fontana homes have 3 to 5 loads of laundry per week, which means the vent should be cleaned every 12 months at minimum. If it’s been two or three years, the lint has been building the whole time.
• There’s lint around the dryer or on the floor behind it. Lint escaping into the laundry area means the vent connection is loose or the hose is damaged. That same loose connection is venting hot, humid exhaust into your walls or floor, and the lint itself is fuel sitting next to a heat source. This is a fix-now situation, not a wait-until-fall situation.

Our Dryer Vent Cleaning Process – Step by Step

1. 1
   Initial inspection and airflow test. We start by pulling the dryer away from the wall and inspecting the transition hose. We check for kinks, tears, improper material, and disconnections. Then we run the dryer briefly to get a baseline airflow reading at the exterior vent. That baseline tells us how restricted the vent is before we begin, and it gives us a comparison number for after the cleaning.
2. 2
   Rotary brush cleaning through the full vent run. We connect professional rotary brushes to a high-torque drive system and work the brush through the entire vent line, from the dryer connection to the exterior termination. The brushes dislodge packed lint, dust, and small debris that a vacuum alone won’t move. For longer vent runs or vents with multiple elbows, we use extendable brush rods to reach every section.
3. 3
   Vacuum extraction and debris removal. Once the rotary brush has loosened everything, we run a high-powered vacuum through the line to extract the dislodged lint and debris. We vacuum from both ends of the vent when accessible: from inside at the dryer connection and from outside at the vent hood. Lint that’s been packed for years often comes out in chunks, and we remove all of it, not just what’s easy to reach.
4. 4
   Exterior vent hood service and component check. We remove and clean the exterior vent hood, clear any nesting material or blockages, and inspect the flap, the screen (if present), and the wall penetration. We replace damaged hoods or flaps with Famco vent components when needed. If the vent termination is inaccessible from the ground, we’ll tell you what we need to do to reach it safely.
5. 5
   Post-cleaning airflow verification. After cleaning, we run the dryer again and measure the airflow at the vent termination. We compare the post-cleaning number to the baseline. The difference tells us exactly how much restriction was removed. If the airflow is still lower than expected for your dryer model and vent length, we’ll investigate further rather than telling you everything’s fine.

How Much Does Dryer Vent Cleaning Cost in Fontana?

Dryer Vent Cleaning Near Fontana – Our Service Area

We clean dryer vents throughout Fontana and the surrounding Inland Empire communities, including Bloomington, Rialto, Sunnyslope, Glen Avon, Muscoy, Rubidoux, Colton, Highgrove, Grand Terrace, Jurupa Valley, and San Bernardino. Most appointments in Fontana are scheduled within a week, and we work around your schedule. If you’re in Bloomington or Rialto, we cover those areas on the same routes, so scheduling is usually just as fast. One call handles the whole area. Whether you’re near the 10 freeway in central Fontana or north toward the foothills, we’ll come to you.

Frequently Asked Questions – Dryer Vent Cleaning in Fontana

Schedule Your Dryer Vent Cleaning Service in Fontana Today

If your dryer is taking too long, running too hot, or you simply can’t remember the last time the vent was cleaned, don’t wait until it becomes a problem you can smell. Call (833) 805-3229 to schedule a no-obligation estimate. We’ll inspect your vent, tell you what we find, and give you a firm price before we start. Norm Castillo and the team at Ashwood Chimney Sweep serve Fontana and the surrounding Inland Empire with the same care we’d give our own homes.

Written by Norm Castillo, Owner at Ashwood Chimney Sweep, serving Fontana and the Inland Empire since opening our doors. We treat dryer vent cleaning as a fire-safety service, because that’s what it is.