Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Studio City, CA
Chimney repair in Studio City usually starts with one of two findings: a cracked clay tile liner in a 1930s Spanish bungalow, or a wind-damaged cap on a hillside stack above Laurel Canyon. Ashwood Chimney Sweep has served Studio City since 2012, and most of the repair work we do here traces back to the same pattern: episodic fireplace use through mild winters lets creosote sit and glaze between seasons, while Santa Ana winds hammer elevated caps and send ember-laden debris into tall flues. If your fireplace has been flagged for a liner issue or you’ve heard rattling from the cap after a wind event, call (833) 805-3229 for an assessment from a company that repairs what it finds, not just documents it.
Why Studio City Homes Are Different
Studio City’s chimney work is shaped by terrain and wind more than any other local factor. Homes in ZIP 91604 climb the Hollywood Hills’ southern slope, where long flues rise through multiple stories on sloped lots and terminate in caps fully exposed to the Santa Ana corridor. After a wind event, we routinely find palm fronds, eucalyptus debris, and dead bird nests packed into elevated caps on streets off Laurel Canyon and Coldwater. The cap that keeps embers out can become the thing trapping wind-blown fuel inside. South of Ventura Boulevard, the 1920s through 1950s Spanish and Mediterranean bungalows and ranch homes bring a different set of problems: masonry fireplaces with clay tile liners of varying age, some original to the structure and long past their service life. The hillside rebuilds with newer factory-built metal flue systems need less liner work but more attention to cap integrity and spark arrestor condition, because insurance inspections after fire season increasingly focus on ember intrusion. Episodic burning on cool winter evenings means creosote has months to harden between fires, and a glaze that would stay manageable in a colder climate becomes a stubborn, baked-on layer here. The dry air does the same to mortar joints, which shrink and crack faster on wind-exposed stacks than on sheltered valley chimneys.
Styles & brands we work with
Our Main Studio City Services
Most Studio City homeowners call us for one of two jobs: the annual chimney sweep that keeps a wood-burning fireplace safe through winter, or a dryer vent cleaning that removes lint buildup in a laundry system most houses ignore until airflow drops. Both are fire-safety services, and both are done by the same crew using the same method: inspect, clean, document, and tell you exactly what we found.
Chimney Sweep in Studio City
A Studio City chimney sweep has to account for what the wind puts on top of the flue before what the fire puts inside it. Tall hillside stacks catch more debris, and a cap packed with palm fronds changes the draft long before you notice smoke in the living room. We clean the full flue, inspect the liner and cap, and send you a photo report showing what we saw. Full details on pricing and what the job includes are on the Chimney Sweep in Studio City page.
Dryer Vent Cleaning in Studio City
Dryer vents in Studio City run through laundry rooms on the first floor of older bungalows, which means long, bending duct runs that collect lint at every turn. A dryer that takes two cycles to dry towels is telling you the vent is partially blocked, and a blocked vent is a fire risk, not a household annoyance. We treat dryer vent cleaning with the same seriousness we give a chimney: full removal of lint, airflow testing, and written documentation of what came out. See the Dryer Vent Cleaning in Studio City page for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Studio City
Chimney repair in Studio City splits along one line: hillside homes with wind-damaged caps, flashing, and crowns, and valley homes with aging clay tile liners that crack under decades of heating cycles. The Mediterranean and ranch bungalows south of Ventura Boulevard were built when clay tile was the only liner option, and many of those tiles are now cracked or spalled, letting heat and gases reach the surrounding masonry. On the hillside streets, wind-driven debris and ember exposure make cap and spark arrestor condition a code and insurance priority, not just a maintenance item. When a liner is failing, HeatShield lets us restore it in place, which means no full liner replacement and no demolition. That is the repair option most sweep-only companies cannot offer, and it matters in a housing stock where original flues are common. Learn more about the full scope of our Chimney Repair work.
Chimney Cap Installation
Signs you need it
Rainwater in the firebox, rust stains on the damper, or visible debris sitting where a cap should be.
What it costs in Studio City
A new chimney cap in Studio City typically runs $200 to $700 installed, depending on flue size and whether the mounting area needs a custom fit.
How we do it
We measure the flue opening, recommend a stainless or copper cap sized for your specific draft needs, and mount it with a spark arrestor mesh that meets the ember-intrusion concerns inspectors look for on hillside properties.
Chimney Cap Replacement
Signs you need it
A cap that’s dented, rusted through, missing mesh, or lifted from its mount after a Santa Ana wind event.
What it costs in Studio City
Replacing an existing cap in Studio City typically falls between $250 and $650 when the mounting bracket is intact, and higher when the flue tile itself needs to be built up first.
How we do it
We remove the old cap, inspect the flue tile beneath it for cracking, build up the mounting surface if needed, and install a new cap sized to the exact flue dimensions so it stays put through the next wind season.
Chimney Liner Installation
Signs you need it
Flue tiles cracked or missing, visible gaps in mortar joints, or an inspection report calling for a liner replacement.
What it costs in Studio City
A full chimney liner installation in Studio City generally ranges from $2,500 to $7,000 depending on flue height and the liner system chosen.
How we do it
We size the flue, specify a DuraFlex flexible liner or rigid system as the job requires, and install it through the existing chimney so the masonry stays intact while the gas path is carried by a new, code-compliant liner.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the chimney, damp drywall in the attic, or visible lifting in the flashing where the chimney meets the roof.
What it costs in Studio City
Chimney flashing repair in Studio City typically runs $350 to $1,200 depending on the length of the flashing run and whether the existing metal can be resealed or needs full replacement.
How we do it
We cut back the old sealant, inspect the step flashing and counter flashing where they meet the roofline, and reset or replace the metal so water sheds around the chimney instead of running down the flue chase.
Chimney Crown Repair
Signs you need it
A cracked or crumbled concrete crown, moss growing on the crown surface, or water pooling on top of the chimney after rain.
What it costs in Studio City
Chimney crown repair in Studio City generally runs $450 to $1,500 depending on the size of the crown and whether it can be resurfaced or needs a full rebuild.
How we do it
We remove the failed crown surface, build a proper reinforced crown with an overhang that sheds water away from the flue, and seal it so the freeze-thaw cycle stops working its way into the masonry.
What Chimney Repair Costs in Studio City
| Item | Typical range in Studio City |
|---|---|
| Chimney cap installation | $200 – $700 |
| Chimney cap replacement | $250 – $650+ |
| Chimney liner installation | $2,500 – $7,000 |
| Chimney flashing repair | $350 – $1,200 |
| Chimney crown repair | $450 – $1,500 |
Do I really need a new liner if the inspection report says I do?
Not always. A cracked clay tile liner is a real safety issue, but it does not always mean full replacement. HeatShield restores deteriorating flues in place, sealing cracks and spalled areas without demolition. We recommend full liner replacement only when the damage is beyond restoration. Call (833) 805-3229 for a camera inspection and an honest recommendation.
What actually happens if I skip a repair the inspection flagged?
Heat and combustion gases reach the brick or framing around a cracked flue, which can ignite creosote inside the chimney cavity or let carbon monoxide seep into the house. A damaged cap or crown lets water in, freezing and cracking masonry further over time. The repair cost compounds the longer it waits. Call (833) 805-3229 for a straightforward assessment.
Brands We Service in Studio City
We stock and install the professional-trade brands that certified chimney contractors specify: DuraFlex liner systems, Olympia Chimney components, and Famco ventilation hardware. These are not retail products you’ll find at a home center. Most common parts are on the truck, which means one visit handles the repair. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Studio City, CA
| Service | Typical range in Studio City |
|---|---|
| Chimney sweep (standard flue) | $180 – $340 |
| Chimney sweep (tall or double flue) | $300 – $550 |
| Chimney cap installation | $200 – $700 |
| Chimney cap replacement | $250 – $650+ |
| Chimney liner installation | $2,500 – $7,000 |
| Chimney flashing repair | $350 – $1,200 |
| Chimney crown repair | $450 – $1,500 |
| Dryer vent cleaning | $150 – $350 |
Hillside flues drive Studio City prices up more than anything else: a two-story stack on a sloped lot needs extension ladders, scaffold setup, and longer run times, and wind-exposed caps usually need replacement more often than sheltered valley ones. The price we quote on the phone is the price you pay after the sweep, because we agree on the scope before any work begins and you see photo evidence of everything we recommend.
Neighborhoods We Serve in Studio City
We work throughout Studio City, from the hillside streets east and west of Laurel Canyon to the flat bungalow blocks around Ventura Boulevard and the ranch pockets near Coldwater Canyon. Our trucks are usually in the area twice a week, and we cluster appointments so a hillside sweep and a valley dryer vent job happen on the same route day.
- Fryman Canyon Area
- Silver Triangle
- Colfax Meadows
- Coldwater Canyon Area
- Laurel Canyon Hills
Service Area – Cities Near Studio City
We schedule work across the Studio City area and the surrounding communities, so if you’re in North Hollywood, CA, Universal City, CA, Sherman Oaks, CA, or West Hollywood, CA, you can book the same crew and the same flat-price estimate. Studio City is our core route, but the service pattern extends through the valley and over the hill.
Serving Studio City, CA — Our Local Coverage Area
We’re based in the Studio City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Studio City
We route Studio City twice a week and cluster appointments by area, so most homeowners get a visit within three to five business days. When fire season is imminent and an ember-exposure issue needs addressing, we prioritize hillside inspections. Call (833) 805-3229 to find the next available slot near you.
Most chimney repairs and sweeps are classified as routine maintenance and don’t require a city permit. Some hillside HOAs with strict exterior standards will want the cap and crown material to match the existing look, and we’re used to working with those requirements. We’ll let you know if anything needs approval before we start.
Yes. A combined visit covers chimney sweeping, repair, and dryer vent cleaning in one call. Studio City homeowners often add a dryer vent cleaning when we’re already out for a chimney job, because both systems need the same kind of attention and the same afternoon works for both. One visit, one invoice, everything documented.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Studio City Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Angela Kim"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Yolanda Martinez"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Paige Norris