Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Highgrove, CA
Most of the chimney work we do in Highgrove comes down to repair, not just cleaning. The homes here were built mostly between the 1950s and 1980s, and many still have their original masonry fireplaces, clay flue tiles, and dampers that have spent decades cycling between hot fires and long dry spells. That combination means hairline cracks in flue tiles, rusted-out dampers, and caps that have lost their mesh or their grip on the crown. If you need a chimney repair assessment in Highgrove, call Ashwood Chimney Sweep at (833) 805-3229.
Why Highgrove Homes Are Different
Highgrove is a small, semi-rural Inland Empire community in the 92313 ZIP where fireplaces and older freestanding stoves are still common. The climate shapes the work more than most people expect. Winters are mild, so a fireplace here might get used only a couple dozen nights a year. The rest of the time, it sits. That intermittent burning is a recipe for creosote that doesn’t get burned off by the next fire. Instead it sits in the flue through a long, hot summer and hardens. By the time we arrive, we often find glaze-stage creosote from smoldering, choked-down fires, plus bird nests or debris packed into caps that sat untouched through the dry season.
Santa Ana winds add another layer. Homes in Highgrove sit near dry brush and open lots, so spark arrestors and caps aren’t optional hardware here. They’re the difference between a contained fire and an ember drifting onto a shake roof or dry landscaping. The housing stock itself also tends toward single-story ranch and tract homes on larger lots, and many of those original fireplaces have aged flue tiles. We regularly see spalling, cracked mortar joints, and stovepipe installs that were never brought up to code when the stove went in. It’s a specific set of conditions, and it changes what a sweep or repair should actually address.
Styles & brands we work with
Our Main Highgrove Services
Highgrove homeowners call us most for two things: the annual or seasonal sweep, and dryer vent cleaning that has been ignored for years. Both are fire-safety services, and both are handled by the same crew.
Chimney Sweep in Highgrove
A chimney sweep in Highgrove has to account for the long off-season. Because fireplaces here are used only a handful of months, the creosote sits and hardens between fires, and the first cold night in November is when people realize the flue isn’t drawing right or something has taken up residence in the cap. We clean the full flue, remove hardened creosote, clear debris from the cap and crown area, and inspect the liner and firebox for the damage this climate tends to cause. If we find a problem, you hear about it with camera images, not just a verbal warning. See how we run a sweep in Highgrove on our Chimney Sweep in Highgrove page.
Dryer Vent Cleaning in Highgrove
Dryer vents in Highgrove’s 1960s-80s ranch homes are often long runs through walls or across crawl spaces, and many of them haven’t been opened since the house was built. Lint builds up in those runs, dries out in the hot inland air, and becomes fuel sitting next to a heat source. We treat dryer vent cleaning as a fire-safety service, not an add-on, and we use manufactured ventilation components from Famco, not improvised hardware. The full write-up on how it works in Highgrove is on our Dryer Vent Cleaning in Highgrove page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Highgrove
Chimney repair in Highgrove is where we spend most of our time, and the pattern is predictable. Homes built in the 1950s through the 1980s still carry original clay flue tiles, and after decades of hot fires followed by long dry spells, those tiles crack and spall. Add in the Santa Ana winds and summer heat, and you get crowns that have separated, caps that have rusted or blown off, and flashing that no longer seals against the roofline. Ashwood Chimney Sweep has served Highgrove since 2012, and we repair with the same materials professional contractors specify: DuraFlex liner systems, HeatShield restoration product, and components sourced from Olympia Chimney and Copperfield. See our full Chimney Repair service hub for how we approach the work.
Chimney Cap Installation
Signs you need it
You see water staining on the firebox floor after rain, hear birds or animals inside the flue, or notice embers escaping during fires.
What it costs in Highgrove
A new chimney cap installed in Highgrove typically runs $280 to $450, depending on flue size and whether the crown needs patching first to seat it properly.
How we do it
We measure the flue, prep the crown surface, and mount a correctly sized cap with a spark-arrestor mesh, securing it so Santa Ana winds don’t shift it.
Chimney Cap Replacement
Signs you need it
The old cap is rusted through, the mesh is torn or missing, or high winds have knocked it out of alignment and it no longer covers the flue.
What it costs in Highgrove
Replacing a deteriorated cap in Highgrove costs about $300 to $450, including removal of the old unit and matching the new cap to the existing flue.
How we do it
We take the old cap down, inspect the crown and flue beneath it, then install a replacement from Copperfield or Olympia Chimney supply lines and confirm the fit and draw.
Chimney Liner Installation
Signs you need it
Your flue tiles are cracked, spalled, or have gaps in the mortar joints, and smoke or carbon monoxide can reach places it shouldn’t.
What it costs in Highgrove
A new chimney liner in Highgrove typically runs $900 to $2,800, depending on the flue’s height, diameter, and whether we need to break out the old tile or reline the existing space.
How we do it
We size the new DuraFlex liner to the flue, connect it to the appliance or fireplace outlet, and secure it top and bottom, then verify the draw under fire conditions.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney, damp drywall in the chase, or old flashing that has pulled away from the brick and roofline.
What it costs in Highgrove
Chimney flashing repair in Highgrove usually costs $350 to $800, depending on whether we’re resealing existing metal or cutting and installing new step flashing.
How we do it
We inspect the roof-to-chimney junction, remove failing sealant or rusted flashing, and install new flashing with proper overlaps and high-temperature sealant.
Chimney Crown Repair
Signs you need it
There are cracks running across the cement crown, chunks are spalling off, or water pools on top of the chimney after rain.
What it costs in Highgrove
Repairing a chimney crown in Highgrove runs $500 to $1,500 depending on how much of the existing cement needs to be removed and recast.
How we do it
We grind or remove the damaged crown material, form and pour a new sloped crown with proper overhang, and seal the joint between crown and flue tile.
What Chimney Repair Costs in Highgrove
| Item | Typical range in Highgrove |
|---|---|
| Chimney cap installation | $280 – $450 |
| Chimney cap replacement | $300 – $450 |
| Chimney liner installation | $900 – $2,800 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $500 – $1,500 |
Can you install a liner without tearing out the old tile?
Yes, in most Highgrove homes we can. We run a camera down the flue and measure the existing space. If the old tile is still intact enough to work around, a correctly sized DuraFlex liner drops into place without demolishing the chimney. Call (833) 805-3229 to get an exact quote.
How do I know if a cracked flue is actually dangerous?
A cracked or spalled flue tile lets heat, smoke, and carbon monoxide reach combustible surfaces behind the chimney wall. In Highgrove’s older ranch homes, those clearances are often tight. We document what we see with camera images and show you before we recommend any liner work.
Brands We Service in Highgrove
We work with a curated lineup of professional-trade brands on repair and cleaning: DuraFlex liner systems, HeatShield restoration product, and components sourced from Copperfield and Famco. We stock parts locally and can usually turn around cap and crown work within the week. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Highgrove, CA
| Service | Typical range in Highgrove |
|---|---|
| Chimney sweep and full inspection | $180 – $340 |
| Chimney cap installation | $280 – $450 |
| Chimney cap replacement | $300 – $450 |
| Chimney liner installation | $900 – $2,800 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $500 – $1,500 |
| Dryer vent cleaning | $120 – $250 |
| Glaze-stage creosote removal (per visit) | $200 – $400 |
Two things push prices up in Highgrove specifically. The first is hardened, glaze-stage creosote, which takes more time and equipment than the soft soot of a regularly used flue. The second is crown and cap damage from the long hot season, which often means we’re repairing the top of the chimney before we can finish the tune-up. We quote a flat price before any work begins, and the estimate covers everything shown in the camera report.
Neighborhoods We Serve in Highgrove
Highgrove’s homes spread across a few older neighborhoods and semi-rural pockets within the 92313 ZIP. We cover all of them, and because Highgrove is compact, we can usually get a tech out to most addresses on the same schedule block.
- Highgrove Heights
- The neighborhoods east of Webster Ave
- The ranch-home tracts near Center St
- Homes along Cottonwood Ave
Service Area – Cities Near Highgrove
Ashwood Chimney Sweep works across the Inland Empire, and Highgrove sits in the middle of our coverage area. We also serve Grand Terrace, CA, Colton, CA, Loma Linda, CA, and Rubidoux, CA. If you’re just over the line in any of these communities, the same crew and the same flat-price policy applies.
Serving Highgrove, CA — Our Local Coverage Area
We’re based in the Highgrove area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Highgrove
We schedule across Highgrove weekly, and most jobs can be booked within a few days. During the fall before burn season, the schedule tightens, and we recommend calling early. Our scheduling is based on appointment, not same-day dispatch, so you know exactly when we’ll arrive.
Most cap, crown, flashing, and liner work in Highgrove falls under routine maintenance and doesn’t require a permit. If your repair involves structural changes or a full rebuild, your local building department may want a plan review. We can tell you which category your job falls into before we start.
We’re based in Fontana and have served Highgrove since 2012. Because Highgrove is a small, semi-rural community, our crews are familiar with the specific housing stock, the Santa Ana wind conditions, and the fire-safety concerns that come with older flues and dry brush.
If you need a chimney repair, a sweep, or a dryer vent cleaned, call Ashwood Chimney Sweep at (833) 805-3229 and we’ll give you a flat-price estimate before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highgrove Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Paige Norris"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Ryan Sullivan"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Michelle Park