Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Murrieta
Dryer vent cleaning in Murrieta typically costs $149 – $285 depending on duct length, access difficulty, and how long it’s been since the last cleaning. Most Murrieta homes have short vent runs that can be cleared in under an hour. If your dryer is taking 60+ minutes per load or your laundry room feels hot and damp while the dryer runs, you’re overdue. Call us at (833) 805-3229 and we’ll get you on the schedule for a free estimate.
We work in Murrieta every week, and we know the tract-home builds from the 1990s and 2000s better than most. Short stucco wall runs, vent hoods glued shut by paint overspray, crushed transition duct behind the dryer. Those are the standard issues in this city, and we fix them the same day we find them.
Why Ashwood Chimney Sweep Is Murrieta’s Preferred Dryer Vent Cleaning Company
Ashwood Chimney Sweep has spent years working in the master-planned tracts and older ranch neighborhoods of Murrieta. Our Dryer Vent Cleaning team treats every vent as a fire-safety system, not an upsell item. Norm Castillo, who leads Ashwood, has built the company’s reputation on one principle: show the customer the problem before recommending the fix. Every dryer vent cleaning includes a camera scope of the duct run, and you see the footage before any repair is discussed.
Murrieta homeowners call us because we understand the specific way these homes were built. In the tracts off Clinton Keith Road and Winchester Road, most builder-grade dryer vents are short, straight stubs running from the laundry room to an exterior garage wall. That means lint rarely travels far, but it packs hard at the first 90-degree elbow or the hood itself. A generic vent cleaning outfit that’s not familiar with Murrieta’s housing stock might miss the crushed flex duct behind the cabinet or the stucco overspray sealing the damper shut. We don’t.
Our Murrieta customers consistently tell us the same thing: they called because their dryer was taking two cycles to finish a load, and they stayed because we showed them actual camera footage of what was blocking the vent. That’s the standard we hold for every call in 92562, 92563, and 92564.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Murrieta
Dryer Vent Inspection and Camera Scope
Every vent cleaning in Murrieta starts with a full inspection of the duct run. We pull the dryer, check the flexible transition behind it, and scope the entire vent path with a camera. You see exactly what we see. If the vent is clear and cleaning can wait, we tell you that plainly. If there’s a restriction, you’ll see it on the screen before we touch anything.
Dryer Vent Cleaning and Lint Removal
We clean the full duct run from the dryer connection to the exterior hood. That includes clearing packed lint at the first 90-degree turn, which is where most Murrieta vents clog first. We use professional rotary brushes and high-velocity air to pull lint out, not push it deeper. When we’re done, airflow is restored and the dryer runs cooler and faster. In Murrieta’s hot summers, a clean vent also means your dryer isn’t pumping 130-degree exhaust air against a restricted duct, which shortens dryer life.
Exterior Hood and Damper Service
Murrieta’s newer stucco homes have a common problem we see constantly: the exterior dryer hood flap gets glued shut by paint overspray or stucco texture from the original build. When that flap can’t open, moist lint gets trapped inside the duct and airflow drops to almost nothing. We free the damper, clean the hood assembly, and make sure it opens and closes freely. On a 2003 tract home off Clinton Keith, our tech pulled the flexible transition behind the dryer and found it crushed against the cabinet, then scoped the wall chase to discover the factory hood flap glued shut by paint overspray, exactly the kind of builder-grade shortcut common in master-planned Murrieta. We cleared the packed lint at the first elbow, freed the damper, and airflow jumped from a weak trickle to a full, even stream.
Dryer Vent Repair and Component Replacement
When a vent run is damaged, kinked, or improperly supported, cleaning alone won’t fix it. We replace crushed flexible transition duct with rigid or semi-rigid metal duct sized for the appliance, rebuild exterior hood assemblies, and secure loose runs with proper strapping. If your vent shares a wall chase with the furnace flue, which happens in many Murrieta tract homes, we’ll inspect the entire chase while we’re in there. A two-appliance airflow problem will not fix itself, and catching it early costs far less than replacing a dryer or dealing with a fire-damaged wall.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Murrieta
We build and repair dryer vent systems with components sourced from Famco and Copperfield, both professional trade supply houses that sell to certified contractors, not retail shelves. Famco’s manufactured ventilation hardware is what we use for hood assemblies, dampers, and wall caps. Copperfield supplies the rigid duct and professional-grade connectors we install when a builder-grade run needs to be redone. For homeowners in Murrieta, that means your vent repair uses the same materials a professional HVAC contractor would specify, not whatever flex duct happened to be on the shelf at a hardware store off Ynez Road. We keep common parts on the truck so most Murrieta repairs happen the same day.
Common Dryer Vent Cleaning Problems We See in Murrieta Homes
- Lint packed at the first 90-degree turn: Most Murrieta vent runs are short, straight stubs through stucco, so lint doesn’t travel far before it hits a bend. Airflow restriction shows up as longer drying times, and that’s the first symptom homeowners notice.
- Paint overspray on the exterior hood flap: In newer stucco homes, the dryer hood was often installed before the final paint job. Paint or stucco texture glues the flap shut, trapping humid lint inside the duct. You’ll see a dryer that runs fine but leaves clothes damp.
- Crushed or kinked transition duct behind the dryer: The original flexible duct often gets shoved back against the wall or cabinet during the first dryer install, and it stays that way for 15 years. It silently reduces airflow and makes the dryer run hotter than it should.
- Shared wall chases with the furnace flue: In the master-planned tracts off Clinton Keith and Winchester, builder-grade fireplaces sometimes share their chase with the furnace flue and the dryer vent. A clogged dryer vent forces the dryer to work harder, but in a shared chase it can also affect how the whole wall holds heat. That’s a Murrieta-specific condition we check on every call.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Murrieta, CA
A standard dryer vent cleaning in Murrieta runs $149 – $229 for most single-family homes with a straight or single-bend duct run under 15 feet. If the vent is longer, has multiple bends, or runs through a second-story wall or roof, expect $229 – $285. The age of the home matters too. Older ranch homes near Washington Avenue sometimes have original metal ducts from the 1970s or 1980s that require gentler cleaning, which takes longer. The final number is always confirmed before we start, and it’s based on what we can see during the initial scope. If we find a crushed transition duct or a glued-shut hood flap, repair work is quoted separately after you’ve seen the camera footage. Call (833) 805-3229 for an exact quote for your Murrieta home. Estimates are free, and there is no charge for telling you the vent can wait if it’s still clear.
We Also Serve Cities Near Murrieta
Our service area around Dryer Vent Cleaning in Murrieta includes Murrieta Hot Springs, Wildomar, Temecula, and Sedco Hills. If you’re just outside the city limits or in one of the newer communities off the 215, call us and we’ll confirm coverage for your address. Most of these areas are within a short drive of our regular Murrieta route.
Serving Murrieta, CA — Our Local Coverage Area
We’re based in the Murrieta area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Murrieta
Because builder-grade duct runs in Murrieta’s tract homes were installed quickly and rarely cleaned since. Even short, straight stucco runs pack lint at the first bend or the exterior hood, and painter’s overspray from the original build often keeps the damper from opening fully. A 2003 home that has never had the vent cleaned is roughly due for its second or third cleaning by now, not its first. Call us at (833) 805-3229 and we’ll scope the vent before anything is cleaned so you know exactly what’s in there.
Hot, dry air makes lint brittle and powdery, so it packs into dense layers inside the duct instead of staying fluffy. That means a Murrieta vent can look fine from the outside while carrying a serious internal restriction. The dry season also means fireplaces sit unused for months, but dryers still run weekly year-round, so the vent never gets a natural break. Regular cleaning every 12 to 18 months is the standard we recommend for most Murrieta homes, more often if you run heavy loads daily.
Yes. In most Murrieta tract homes built between 1990 and 2010, the laundry is in the garage and the vent is a short straight run through the garage wall or stucco exterior. The problem is rarely the length of the run. It’s the first bend behind the dryer or the hood assembly on the outside wall. Those two spots carry the majority of clogs we see in Murrieta, and both are quick to fix once the dryer is pulled out and the duct is accessible.
It can. In some Murrieta tract homes, the dryer vent shares a wall chase with the furnace flue or a factory-built fireplace vent. A clogged dryer vent raises the temperature inside that chase and reduces the airspace the other flue needs to draft properly. This is not a universal condition, but it’s common enough in Clinton Keith and Winchester tracts that we check for it during every dryer vent cleaning. If your fireplace or furnace flue shares the chase, we’ll inspect both while we’re already at the house.
Get it fixed before you run the dryer again. A flap stuck open lets hot air, pests, and dust into the duct. A flap stuck closed, which we see constantly in Murrieta’s painted stucco homes, traps lint and moisture inside the wall. We free the damper, clean the assembly, and replace the hood if it’s warped or broken. It’s a same-day fix on most Murrieta calls, and it’s often the difference between a dryer that barely works and one that finishes a load in 45 minutes. Call (833) 805-3229 to have it checked.
Contact Ashwood Chimney Sweep in Murrieta
If your dryer is running long, your laundry room feels humid, or you have not had the vent cleaned since you moved in, call us. We serve Murrieta every week, and we’ll give you a straight answer with camera footage to back it up. Norm Castillo and the Ashwood team treat dryer vent cleaning as a fire-safety service, no different from a chimney sweep. One call handles the assessment, the cleaning, and any repair the vent needs. Reach us at (833) 805-3229 for a free estimate.
Written by Norm Castillo, Owner at Ashwood Chimney Sweep, serving Murrieta since day one.