Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Fontana?
Chimney repair in Fontana typically costs $250 to $600 for minor fixes like crown or mortar repair, while larger jobs such as a flue liner replacement can run $3,000 to $7,500. Most Fontana homeowners we work with land somewhere around $450 to $1,200 for a single repair visit, depending on what the inspection turns up. The biggest single cost driver is whether your flue needs restoration or full replacement, and that’s something we can only confirm after we’ve seen the inside of the chimney.
Chimney Repair Cost Breakdown (2026)
Here’s what the line items actually cost in the Fontana market this year. These ranges reflect real jobs on Inland Empire homes, not national averages pulled off a lead-generation site. Most of these are priced as add-on work after a chimney sweep and inspection, and if we do more than one repair in the same visit, we usually knock something off the total.
| Repair Type | Typical Fontana Cost (2026) |
|---|---|
| Chimney sweep + inspection (baseline) | $175 – $295 |
| Crown repair or rebuild | $250 – $650 |
| Mortar joint tuckpointing | $300 – $900 |
| Brick spalling repair (per section) | $325 – $800 |
| Chimney cap installation | $150 – $400 |
| Flashing repair (leak source) | $275 – $700 |
| HeatShield flue liner restoration | $1,200 – $2,400 |
| DuraFlex stainless liner replacement | $3,000 – $7,500 |
| Damper replacement (top-sealing) | $350 – $700 |
| Smoke chamber parging | $500 – $1,100 |
| Full chimney rebuild (per flue) | $5,500 – $12,000 |
What pushes a job toward the top of a range? Depth of damage, access difficulty, and whether we’re repairing a masonry flue or working on a pre-fabricated system. Fontana has a mix of both. Older homes in the downtown core often have original brick flues from the 1950s and 1960s; newer construction out toward the Etiwanda and Summit Heights areas is more likely to be pre-fab with a stainless liner already in place, which changes how we approach a repair. Full liner replacement sits at the high end because it’s the most labor-intensive job we do, and it’s the one that matters most for safety. If your flue has cracked or deteriorated, you don’t have a working chimney until that’s corrected.
What Affects Chimney Repair Pricing in Fontana
Fontana has a few conditions that come up again and again in the repairs we do here. Here’s what actually moves the number on your estimate:
- Inland Empire heat and thermal cycling. Summer temperatures routinely push past 100°F in Fontana, and the swing between those long hot days and cool winter nights does real work on masonry. Brick and mortar expand and contract, and over 15 or 20 years that movement shows up as hairline cracks in the crown and crumbling mortar joints. We see crown failure more often in the south Fontana neighborhoods that bake in afternoon sun than we do on shaded lots.
- Santa Ana wind events. The fall and winter wind events that funnel through the Cajon Pass hit Fontana’s rooftops harder than most of the Los Angeles basin. Chimney caps, flashing and the top courses of brick take the brunt. A cap that’s rattled loose or flashing that’s lifted will let water straight into the flue, which turns a $200 cap replacement into a four-figure masonry repair if it’s ignored.
- Flue liner condition and type. A clay-tile liner that’s cracked can sometimes be restored with HeatShield instead of being torn out, and that restoration costs a fraction of a full liner replacement. If the liner is too far gone, though, we install a DuraFlex stainless system. That’s a different job with a different footprint, and it’s the single biggest driver of cost on your estimate.
- Masonry versus pre-fab construction. Brick chimneys on older Fontana homes can be repaired brick by brick. Pre-fab units often can’t be patched – if the inner wall of a pre-fab is compromised, it gets replaced. We sort that out during inspection so you’re not paying for the wrong kind of repair.
- Access and roof pitch. A steep roof, a chimney set back behind a tile roof, or a second-story install all add labor time. That’s overhead, not markup. Any honest estimate accounts for getting to the problem safely.
- Urgency. A leaking chimney headed into winter rain, or a carbon-monoxide concern that needs correcting, moves the job to the front of the schedule. We don’t charge emergency multipliers, but a job that has to be done today gets scheduled tight, and that’s a constraint we plan around.
How to Save on Chimney Repair
You can’t predict a cracked crown, but you can keep small problems from becoming big ones. A few things that work:
- Book the sweep and the repair in one visit. Every repair starts with a clean, inspected flue. If we’re already on your roof for the sweep, we’re not sending a second crew out for a crown or cap job. That’s why our Chimney Repair in Fontana page notes that most of our repair calls start as a routine sweeping appointment.
- Fix the leak source before it spreads. A $300 flashing repair performed early is much cheaper than letting a small drip soak the surrounding masonry through a wet winter. Inland Empire rain is short and intense, and it finds loose flashing fast.
- Ask about HeatShield before you accept a liner replacement bid. Some sweep-only companies can’t offer restoration because they don’t stock or install the product, so their quote jumps straight to full replacement. HeatShield restores a deteriorating flue from the inside; if your liner qualifies, it’s a real cost saving and a durable repair. We keep it stocked for that reason.
- Bundle the dryer vent cleaning. If the crew is already in the house, adding dryer vent cleaning is one of the least expensive line items you’ll get a chance at. That’s a whole separate fire-risk system; getting it done in the same call costs less than booking a second appointment.
- Get the estimate before work begins. We don’t start a job without telling you the price first. Call (833) 805-3229 and ask for a free estimate – we’ll take a look, tell you what we’d do, and quote it flatly. You’re welcome to compare it to a second bid.
Sweep, Repair, and Ventilation – One Call, One Contractor
The thing that costs homeowners the most in Fontana isn’t labor or materials. It’s the hand-off. When your inspection crew can’t do the repair, you end up paying for a second report, a second trip charge, and the telephone game between whoever looked at your chimney and whoever actually fixes it. We handle the whole flue: sweeping, assessment and repair with materials from Ashwood Chimney Sweep and the same professional-grade supply brands certified contractors use across the country. Our liner work uses DuraFlex flexible systems and HeatShield restoration product, both sourced through the professional chimney trade rather than retail. Parts come from Olympia Chimney, Copperfield, Gelco and Famco – manufactured components specified for chimney and ventilation work. Dryer vent work uses genuine Famco-supplied hardware, not improvised flex pipe from a hardware store.
A dryer vent is a fire-safety system, not an afterthought, and we treat it that way. The same crew that cleans your flue cleans your dryer vent, in the same visit, because a clogged dryer duct is one of the leading causes of house fires in the Inland Empire, and a homeowner who’s already had one ventilation system inspected is the one who’ll actually remember to rebook the other. When we clean and repair together, you know who’s been in your home and who to call if something comes up down the road.
If you’re weighing a repair against a rebuild, we’re honest about the line. A crack that only affects the crown is a $250 to $650 job. A flue that’s failing from the inside and holding structural issues in the masonry is a different conversation, and we’ll tell you which one you’ve got before anyone touches a trowel.
FAQs – Chimney Repair Cost
What’s the average cost of chimney repair in Fontana?
Most Fontana chimney repairs run $450 to $1,200 for a single visit. Small jobs like crown patching, cap replacement or flashing repair sit at $150 to $700; larger jobs like a flue liner replacement run $3,000 to $7,500. Call (833) 805-3229 for a free estimate that pins down your actual number.
Is it cheaper to repair a chimney or rebuild it?
Repair is almost always cheaper when the damage is surface-level: crown, mortar, flashing, cap. A crown rebuild runs $250 to $650 versus $5,500 to $12,000 for a full chimney rebuild. But if the flue is failing internally and the masonry has structural spalling, a rebuild may be the only safe path. An inspection tells you which one you’re facing, and we quote both so you can compare. Call (833) 805-3229 to schedule.
How much does a chimney liner cost in Fontana?
A HeatShield flue liner restoration runs $1,200 to $2,400, and a full DuraFlex stainless liner replacement runs $3,000 to $7,500. HeatShield restores a deteriorating clay flue in place and avoids the cost of full replacement when the liner still qualifies. Ask for the restoration quote first – it’s the smart call for a lot of Fontana homes. Call (833) 805-3229 for a free assessment.
Can you come out today for a chimney leak?
Often, yes – we schedule leak and repair calls ahead of routine sweeping when it’s raining or storm season. We don’t promise a same-day guarantee on every job, but we do move a leaking chimney up the list because water in a flue gets more expensive by the day. Call (833) 805-3229 and we’ll tell you the earliest opening.
Why does my Fontana chimney cost more to repair than my neighbor’s?
Fontana’s summer heat and wind events hit every roof differently depending on sun exposure, roof pitch and construction age. Older brick homes near the downtown core often need masonry work newer pre-fab systems near the Etiwanda foothills don’t, and repairs on a steep or tile roof add labor. That’s why we quote your chimney on its own condition, not a flat price. Call (833) 805-3229 for a free estimate.
Why Fontana Homeowners Call Ashwood
Chimney Repair isn’t a sideline for us. It’s one of three services – sweeping, repair, and dryer vent cleaning – and each one is handled by the same crew that knocks on your door. We install DuraFlex liners and HeatShield restoration as core repair options, not upsells, because the materials are what keep a repaired flue safe for the next decade of Fontana summers and Santa Ana wind events. When you call for a sweep, you’re getting an inspection that can turn into a repair without a second appointment, a second crew, or a second bill.
Call (833) 805-3229 for a free estimate on your chimney repair. We’ll schedule an inspection, walk you through exactly what’s wrong and what it takes to fix it, and give you a number before we start. If the flue needs a liner repair, our Chimney Repair in Fontana page explains the HeatShield and DuraFlex options in more detail – and if you’re also due for a sweep, we’ll get that on the same visit.
Pricing reflects the Fontana market as of 2026. Ashwood Chimney Sweep offers free estimates – call (833) 805-3229.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Marcy Vaughn"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Nadia Hassan"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Lina Aziz