Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Calimesa, CA
Chimney repair in Calimesa usually comes down to one of three problems: cracked flue liners, failed flashing, or crowns that have given up after decades of Inland Empire sun. The housing stock here, a mix of older ranch-style homes and manufactured homes built in the 1970s and 80s, means we see original masonry chimneys that have never been relined and factory-built units that most general contractors won’t touch. Ashwood Chimney Sweep has served Calimesa since 2012, and we work on all of it. If you need someone who can diagnose the problem and fix it with professional-grade materials, not document it and walk away, call (833) 805-3229.
Why Calimesa Homes Are Different
Calimesa sits right where the San Bernardino foothills meet the wildland-urban interface, which changes how we approach chimney work here. Santa Ana winds push through the pass in fall, dry everything out, and turn any creosote buildup into an ignition source waiting for a spark. A spark arrestor that has rusted through or pulled loose isn’t a cosmetic issue in Calimesa, it’s the difference between a normal burn season and a chimney fire that spreads to brush. We check arrestors on every visit.
The housing stock adds another layer. Many older ranch homes in the 92320 ZIP code still have their original masonry chimneys, and a lot of them were built before current clearance-to-combustibles standards. Manufactured homes are common here too, and those typically have factory-built chimneys or wood stoves that need cleaning methods and inspection approaches different from a traditional brick stack. Some Calimesa properties have chimneys shared between units or built against hillside lots where roof access means working around brush and uneven ground. None of this is difficult if you know what you’re looking at before you climb the ladder.
Styles & brands we work with
Our Main Calimesa Services
Most Calimesa homeowners call us for one of two things: a chimney that hasn’t been cleaned in years, or a dryer vent that has been ignored even longer. Both are fire-safety issues, and both are handled by the same crew in one visit when that makes sense.
Chimney Sweep in Calimesa
A proper chimney sweep in Calimesa means more than running a brush up the flue. We remove creosote, check the spark arrestor, inspect the liner with a camera, and document the condition of the cap and crown while we’re on the roof. Older ranch homes and manufactured units in Calimesa often haven’t been swept since they were built, which is exactly when creosote has had time to glaze and harden. If your fireplace hasn’t been touched in two or more seasons, start here. Chimney Sweep in Calimesa
Dryer Vent Cleaning in Calimesa
Dryer vent cleaning gets treated as a side note by most chimney companies. We don’t do that. Lint is fuel, and a restricted vent forces the dryer to work harder while exhaust heat builds up in the wall. Calimesa’s dry climate makes lint especially fine and fast to accumulate. We clean the full run from dryer terminal to exterior vent cap using Famco ventilation components when repairs or rerouting are needed. It’s a fire-safety service on equal footing with chimney sweeping. Dryer Vent Cleaning in Calimesa
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Calimesa
Chimney repair in Calimesa is what we spend most of our time doing and what we’re best known for. The sun here bakes chimney crowns until they crack, winter rain finds those cracks and freezes, and the cycle repeats until water is running down the inside of the flue. The result is spalled brick, rusted dampers, and flue liners that have lost their structural integrity. We repair with the same materials professional contractors specify, and when the liner is failing, HeatShield lets us restore it rather than just document the problem and hand you a demolition estimate. Ashwood handles the whole flue, not just the easy parts. If you’ve had an inspection report that flagged liner damage, flashing failure, or a compromised crown, we can fix what was found. See Chimney Repair for the full scope of what we cover.
Chimney Cap Installation
Signs you need it
You can see daylight or rust through the existing cap, birds are getting into the flue, or there was never a cap installed in the first place.
What it costs in Calimesa
Chimney cap installation in Calimesa typically runs $125 to $425 depending on the flue size and whether you need a standard galvanized cap or a stainless model sized for a wood stove.
How we do it
We measure the flue opening exactly, select a cap that matches the fuel type and draft requirements, then mechanically fasten it to the flue tile or crown so it stays put through Calimesa’s Santa Ana winds.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracked flue tiles, missing mortar joints, or spalled clay, or you’ve switched to a wood stove or high-efficiency gas insert that requires a properly sized liner.
What it costs in Calimesa
Chimney liner installation in Calimesa typically falls between $1,800 and $4,500 for a stainless flexible liner, with the final number driven by flue height, accessibility, and whether insulation is required.
How we do it
We run a camera to confirm the flue dimensions, size a DuraFlex liner to the appliance, insulate where clearances demand it, and connect the liner to the appliance and top plate with a sealed termination.
Chimney Flashing Repair
Signs you need it
You have water staining on the ceiling near the chimney, damp brick after rain, or visible gaps and lifted flashing where the chimney meets the roofline.
What it costs in Calimesa
Chimney flashing repair in Calimesa typically ranges from $300 to $850 depending on whether we’re resealing a single plane or replacing step flashing, counter flashing, and the apron around a two-plane chimney.
How we do it
We remove the old flashing and sealant, cut new step and counter flashing to fit the masonry profile, and re-bed everything in high-temperature waterproof sealant that won’t crack under Calimesa’s summer heat.
Chimney Crown Repair
Signs you need it
The crown has visible cracks, chunks of concrete are missing, or washing at the surface has worn the crown down so water pools instead of shedding off the sides.
What it costs in Calimesa
Chimney crown repair in Calimesa typically runs $400 to $1,100 depending on whether we’re sealing thin cracks or building a new cast-in-place crown with proper overhang and drip edges.
How we do it
We grind out loose material, clean the surface, and apply a new mortar or poured crown with the correct pitch away from the flue so water sheds off before it can soak into the masonry.
What Chimney Repair Costs in Calimesa
| Item | Typical range in Calimesa |
|---|---|
| Chimney cap installation | $125 – $425 |
| Chimney flashing repair | $300 – $850 |
| Chimney crown repair | $400 – $1,100 |
| Chimney liner installation | $1,800 – $4,500 |
How long does chimney repair take in Calimesa?
Most crown and flashing repairs take half a day on site. Liner installation usually takes a full day. We confirm the exact timeline after the camera inspection so there are no surprises once work starts.
Can you repair a chimney liner without replacing it?
Yes, if the damage is cracking or spalling that hasn’t yet compromised the entire flue, HeatShield restoration can resurface the liner without full replacement. We’ll show you the camera footage first so you know exactly what condition the liner is in.
Brands We Service in Calimesa
We install and repair systems built around materials from Olympia Chimney, Copperfield, and DuraFlex. These are professional-trade brands distributed through chimney supply houses, not retail home centers. Because we stock their components regularly, turnaround on cap, liner, and ventilation work in Calimesa runs faster than hunting for substitute parts. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Calimesa, CA
| Service | Typical range in Calimesa |
|---|---|
| Chimney cleaning and inspection | $189 – $359 |
| Chimney cap installation | $125 – $425 |
| Chimney flashing repair | $300 – $850 |
| Chimney crown repair | $400 – $1,100 |
| Chimney liner installation | $1,800 – $4,500 |
| Dryer vent cleaning | $129 – $249 |
In Calimesa, the main things that push a chimney repair quote up are flue height, roof pitch, and how close the chimney sits to brush-covered hillsides, which makes ladder setup slower and more deliberate. You’ll get a firm upfront price before any work begins, and we don’t add line items mid-job unless we uncover something you need to know about first.
Neighborhoods We Serve in Calimesa
We work across the entire 92320 ZIP code, from the older neighborhoods off Calimesa Boulevard to manufactured home communities and homes set back against the foothills. We know which streets have tight driveways and which properties need ladder work from the hillside side, so response scheduling is based on location and job size rather than a generic four-hour window.
- Sundial Mobile Home Park area
- Calimesa Hills / Calimesa Country Club
- Casa De Oaks
- Cherry Valley border (west Calimesa)
- Yucaipa Ridge foothill homes
Service Area – Cities Near Calimesa
Ashwood Chimney Sweep works throughout the Inland Empire foothills, so if you’re in a nearby community we likely already have a route through your area. We regularly serve Yucaipa, CA to the east, Mentone, CA up the hill, Redlands, CA to the west, and Banning, CA over the pass. If you’re unsure whether we cover your address, call the shop line and we’ll confirm it in one minute.
Serving Calimesa, CA — Our Local Coverage Area
We’re based in the Calimesa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Calimesa
Most repair work, like cap replacement, flashing repair, and crown resurfacing, does not require a permit in Calimesa. Liner installation and any structural masonry work may, and we’ll tell you up front if your job needs one and who files what.
We schedule Calimesa calls based on the route, and most inspections and cleanings are booked within one to two weeks. During the fall push before burn season, we recommend calling at least a month before you plan to light the first fire.
Yes. Factory-built and wood stove flue systems use different components and clearances than masonry chimneys, but we inspect, clean, and repair them regularly. We’ll match the cap and liner work to the manufacturer’s specifications for your unit.
If you’ve got a chimney that needs attention in Calimesa, the fastest way to a straight answer is a phone call. We’ll talk through what you’re seeing, schedule an inspection if needed, and give you a firm price before anything is done. Call (833) 805-3229 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Calimesa Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Alejandro Garcia"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Paul Padgett"They were the only ones willing to just tell me the price. Everyone else wanted to "come take a look" first, which in my experience means come apply pressure in person."
— Marisol Salazar