Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Fontana
Dryer vent cleaning in Fontana typically costs $120 – $180 for a standard single-story tract home, and most jobs are finished in under two hours. If the vent hood is corroded or the transition duct behind the dryer is crushed, expect to add $40 – $90 for replacement parts and labor. We work throughout Fontana, from the older stucco ranch homes south of the 210 to the newer subdivisions north of Summit Avenue, and we answer our own phones at (833) 805-3229.
Norm Castillo has spent years working inside the flues and vents of Fontana’s 1950s and 1960s tract homes, and he knows exactly what this housing stock does to a dryer exhaust system. The problems here aren’t the same ones you’d find in Rancho Cucamonga’s newer construction or in Bloomington. Fontana homes have a specific failure pattern, and we’re set up to catch it before it becomes a fire call.
Why Ashwood Chimney Sweep Is Fontana’s Preferred Dryer Vent Cleaning Company
Most Fontana homeowners don’t think about the dryer vent until the dryer starts taking two cycles to finish a load. By then, the vent has usually been restricting airflow for months or years. We built our Dryer Vent Cleaning service around the realities of Fontana’s housing stock, because the failures we see here are predictable and preventable.
We’re a full-service ventilation contractor, not a one-truck dryer vent franchise. That matters in Fontana because the same house with a clogged dryer vent often has a fireplace flue that hasn’t been inspected since the Kennedy administration. One call gets you a tech who can assess both systems, tell you what’s actually wrong, and fix it with professional-grade materials from Copperfield, DuraFlex, and Famco. No hand-off to a separate crew, no broken telephone between the inspector and the person doing the work.
Our reputation in Fontana is built on a simple approach: show the homeowner what we found, with photos and camera footage, and recommend only what the evidence supports. If a vent can safely wait another year, we say so. If it can’t, we show you the camera image that explains why. That’s how Norm Castillo runs every job, from a routine dryer vent cleaning in a backyard on Juniper Avenue to a full chimney restoration near Sierra Lakes.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Fontana
Dryer Vent Cleaning
We clean the entire exhaust run, from the back of the dryer to the termination hood on the exterior stucco wall. In Fontana’s older tracts, that run is almost always short, horizontal, and partially packed with lint the previous owners never cleared. We use rotary brush tooling sized to the duct, collect the debris with a HEPA-filtered vacuum, and verify airflow before we leave.
Dryer Vent Inspection
Every cleaning includes a camera inspection of the full run, because in Fontana the duct itself is often the problem. Corroded galvanised sections, separations at the wall penetration, crushed foil transition duct behind the dryer, and cracked stucco seals all show up clearly on camera. We show you the footage on our tablet, not just a verbal summary.
Dryer Vent Hood and Termination Replacement
Fontana’s original galvanised hoods corrode fast in this inland heat. When we replace one, we use Famco-supplied ventilation components, installed with a proper hood flange and a sealed penetration through the stucco. This is not a cosmetic upgrade. A corroded hood lets Santa Ana-driven rain into the duct line all winter, where it mixes with lint and creates a plugged, moisture-trapping mess.
Transition Duct Replacement
The foil accordion duct between the dryer and the wall is supposed to be a code fallback, not a permanent install. In Fontana we routinely find this duct crushed flat against the wall behind the dryer, silently choking airflow without tripping any alarm. We replace it with smooth semi-rigid aluminum run, cut and fitted to the exact space, so the dryer can actually exhaust.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fontana
When we repair or replace components on a Fontana dryer vent system, we install materials from the professional trade supply chain, not what’s hanging on a big-box shelf. Our ventilation hardware comes from Famco, a manufacturer whose products are specified on commercial and residential ventilation jobs nationwide. For chimney-related work that often accompanies a dryer vent call in these older homes, we stock and install Copperfield and DuraFlex components, including DuraFlex flexible liner systems that aren’t available through retail channels. The difference shows up in how long the repair lasts in Fontana’s heat and in the quality of the finished installation.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Fontana Homes
- Corroded galvanised hoods on stucco walls. Decades of Inland Empire heat cycling and winter Santa Ana rain crack the penetration seal and eat through the hood itself. Water gets in, mixes with lint, and the whole system becomes a plugged, rust-streaked mess on the exterior wall.
- Crushed foil transition ducts behind the dryer. In 1950s and 1960s tract homes, the laundry alcove is tight, and the original foil accordion duct gets shoved and crushed against the stucco. Airflow drops to a trickle, and the dryer starts overheating while the homeowner just thinks the dryer is getting old.
- Decades-uninspected vent runs in homes south of the 210. Many owners in the older Kaiser Steel tracts have never had a camera run on the dryer vent. These runs sit with hardened lint packed against hot galvanised duct walls, and no one knows until the dryer burns out or the vent smolders.
- Lint-packed horizontal runs with low hoods. The short, under-insulated runs common in Fontana’s stucco construction terminate at low galvanised hoods that clog with lint, debris, and sometimes pest nests. The lint packs hard against the duct walls and requires mechanical removal, not a vacuum pass.
Pricing for Dryer Vent Cleaning in Fontana, CA
A standard dryer vent cleaning in Fontana runs $120 – $180 for most single-story homes with a straight exterior wall run. Two-story homes or runs that terminate through the roof typically run $150 – $220 because of the added access and hose work. Replacing a corroded termination hood adds $40 – $90, and a new semi-rigid transition duct installed behind the dryer runs $35 – $65. If we’re already on site for a chimney sweep, bundling the dryer vent cleaning saves you about $40 off the standalone price.
We quote a flat price before we start, based on what we can see at the back of the dryer and the exterior wall. No hourly billing, no surprise line items. Call (833) 805-3229 and Norm Castillo will give you an exact number for your Fontana home, usually in under five minutes.
We Also Serve Cities Near Fontana
Our crews are based in Fontana and cover the surrounding Inland Empire communities regularly, so response times don’t suffer when you’re just across the city line. We handle Dryer Vent Cleaning in Fontana daily, plus regular routes through Bloomington, Rialto, Glen Avon, and Pedley. If you’re in any of those areas and need the same camera-verified cleaning we provide throughout Fontana, call us and we’ll get you scheduled.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Fontana
The lint trap only catches about 80% of what your dryer produces, and the rest goes into the vent. In Fontana’s older tract homes, the short horizontal runs and low exterior hoods allow that remaining lint to compact against the galvanised duct walls, especially during hot summer months when the duct metal expands and the lint bakes on. Cleaning the trap does nothing for the lint already cemented inside the run. If your vent clogs within a year of a cleaning, the duct run itself is likely the problem, and a camera inspection will show exactly where the buildup is. Call (833) 805-3229 and we’ll put a camera in the line for an exact diagnosis.
Every 12 to 18 months is the right interval for a typical Fontana tract home with a standard short exterior run. Homes with longer runs, multiple dryer users, or pets that shed heavily may need annual cleaning. Fontana’s hot summers accelerate lint compaction inside the duct, and the original 1960s galvanised hoods clog faster than modern flap-style terminations. If you’ve never had the vent inspected since you bought the house, start with a cleaning and camera inspection now, and we’ll tell you what interval your specific system actually needs.
Yes, and we see this failure mode constantly in Fontana’s older stucco construction. A corroded hood lets Santa Ana-driven rain into the duct line, where it mixes with lint and creates a packed, moisture-trapping obstruction that blocks airflow and can cause the dryer to overheat. The duct walls behind the hood are often already rusted, which makes the blockage worse. Replacing the hood and inspecting the full run is a fraction of the cost of a dryer fire or a burned-out heating element. We bring Famco hoods and flanges on every Fontana truck, so the repair happens the same visit we find it.
Those are chimney inspection levels, and here’s the connection: in Fontana’s 1950s and 1960s homes, the dryer vent and the fireplace flue are usually in the same wall system and both suffer from the same decades of neglect. When we open a dryer vent and find the kind of corrosion and lint compaction we described earlier, it’s a strong signal that the fireplace flue has never been properly inspected either. We’re one contractor who can assess both systems on the same visit. That’s the advantage of hiring a full-service ventilation specialist in a market full of chimney-only sweeps. Norm Castillo will run a camera up the flue and through the dryer vent in one appointment, and you’ll see the footage from both.
Start by calling us and telling us the street and the decade of the house. We’ll ask a few quick questions about where the dryer sits and where the vent exits, and then we’ll book a cleaning and camera inspection. We recently opened a dryer vent in a 1960s ranch home south of the 210 near the former Kaiser Steel site, where the original galvanised hood had corroded through and the foil transition duct behind the dryer was crushed flat against the stucco wall. Using our DuraFlex and HeatShield-compatible tooling, we pulled out a wad of compacted lint the size of a football and replaced the crushed run with smooth stainless duct. The dryer’s airflow doubled on the spot, and that homeowner, who had never had the vent inspected since buying the house, booked a chimney inspection the same day. Call (833) 805-3229 for a free estimate on your Fontana home.
Written by Norm Castillo, Owner at Ashwood Chimney Sweep, serving Fontana and the Inland Empire since 2014.