Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Silver Lake, CA
Chimney repair in Silver Lake usually means working on a 1920s or 1930s fireplace that has not been opened in years. The masonry is original, the clay tile liner is cracked or missing, and somewhere between the firebox and the cap there’s a nest. Ashwood Chimney Sweep has served Silver Lake since 2012, and we handle the whole flue, not just the easy parts. If you need a sweep, a liner, a new cap, or a camera inspection before you buy a hillside bungalow, call (833) 805-3229.
Why Silver Lake Homes Are Different
Silver Lake’s housing stock is largely pre-war Spanish Colonial Revival, Tudor, and a scattering of mid-century stucco homes built into hillsides. That matters for chimney work because most of these fireplaces are original brick, built for wood, and tied to clay tile flues that were not designed for a gas insert or a modern high-efficiency appliance. When a flue has to accommodate a gas conversion, the liner situation has to be checked, and it often has not been since the house was re-roofed.
The Mediterranean climate drives the second pattern we see. Wet winters soak chimney crowns and brick mortar. The long dry season bakes them. Over a few decades, hairline cracks open up, water gets in, and spalling starts. Silver Lake’s dense oak and eucalyptus canopy makes it worse: leaf litter lands on crowns and caps, birds and raccoons find their way into uncapped flues, and the whole system needs more attention than a flue in a bare suburban lot. One local quirk: during winter rains, steep hillside lots and overhanging trees send gutter overflow onto chimney exteriors, staining brick and stucco. Homeowners call us thinking the chimney is filthy with soot, and the flue is often clean; the masonry just needs to shed water properly again.
If you are in the 90026 ZIP and you own one of these homes, the test is simple: when was the last time someone actually looked down the flue with a camera? If the answer is “never” or “when we bought it,” the system deserves a look.
Styles & brands we work with
Our Main Silver Lake Services
Most Silver Lake homeowners call us for one of two reasons: the fireplace is due for a real cleaning and inspection, or the dryer vent has never been touched since the laundry room was remodeled in the 2000s. Both are covered below, each with its own dedicated Silver Lake page.
Chimney Sweep in Silver Lake
A chimney sweep in Silver Lake is not just a brush up and down. It is an inspection of a 90-year-old system that may have been sitting unused through two or three ownership changes. We check the firebox, damper, flue liner, smoke shelf, crown, and cap, and we do it without damaging original decorative masonry. Many of the homes we sweep have clay tile liners that aggressive cleaning would chip, so we use the right method for the flue material. Chimney Sweep in Silver Lake
Dryer Vent Cleaning in Silver Lake
Your dryer vent is a fire-risk system, not an afterthought. Silver Lake’s hillside homes often have long, twisty dryer runs that exit through roofs or through stucco walls, and older laundry rooms were sometimes built with foil or vinyl ducting that is a known fire hazard. We clean the full run, inspect the termination, and replace worn components with proper Famco-manufactured hardware when the vent needs more than cleaning. Dryer Vent Cleaning in Silver Lake
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Silver Lake
Chimney repair in Silver Lake usually starts with a problem the homeowner did not create: a cracked crown that has been letting rainwater into the brick for years, or a pre-war clay tile liner that was never updated when the fireplace was converted to gas. Silver Lake’s hillside climate speeds up masonry damage, and the original 1920s and 1930s fireboxes were not built for modern use patterns. We repair with the same materials professional contractors specify, and we do not recommend a single repair without camera evidence you can see for yourself. Our Chimney Repair service covers the full flue, from the firebox to the cap.
Chimney Cap Installation
Signs you need it
You hear birds or animals inside the chimney, see leaf litter falling through the firebox, or notice water streaking down the flue walls after rain.
What it costs in Silver Lake
In Silver Lake, a proper stainless or copper cap installation, including sizing to the flue, typically runs $350 to $650.
How we do it
We measure the flue tile, match a cap to the crown profile, secure it with the correct adhesive and mechanical fasteners, and check that the mesh will keep both embers in and animals out.
Chimney Liner Installation
Signs you need it
You have flue tiles that are cracked, spalled, or shifted, a gas insert installed in an unlined or clay-lined flue, or excessive creosote that keeps returning despite regular sweeps.
What it costs in Silver Lake
Chimney liner installation in Silver Lake typically runs $3,500 to $7,000 depending on flue height, roof pitch, and liner material.
How we do it
We run a camera inspection to document the flue condition, size the liner to the appliance and the flue dimensions, and install a DuraFlex system that meets the venting code for the appliance served.
Chimney Flashing Repair
Signs you need it
You have water stains on the ceiling near the fireplace, damp brick around the chimney at roof level, or visible gaps, rust, or lifted flashing at the roof penetration.
What it costs in Silver Lake
Chimney flashing repair in Silver Lake typically costs $400 to $1,100 depending on roof pitch and how much of the existing flashing can be salvaged.
How we do it
We remove the damaged flashing, inspect the roof decking beneath, and install new step and counter flashing cut to the chimney’s profile, sealed and fastened for water resistance.
Chimney Crown Repair
Signs you need it
You see cracks, crumbling edges, or a crown that has pulled away from the flue tile, especially after a winter of Silver Lake rain and gutter overflow.
What it costs in Silver Lake
Chimney crown repair in Silver Lake typically runs $300 to $800 depending on crown size and how much of the original crown needs rebuilding.
How we do it
We inspect the crown for cracks and freeze-thaw damage, remove loose material, and apply a proper crown coat or rebuild the crown with the correct overhang and drip edge.
What Chimney Repair Costs in Silver Lake
| Item | Typical range in Silver Lake |
|---|---|
| Chimney cap installation | $350 – $650 |
| Chimney flashing repair | $400 – $1,100 |
| Chimney crown repair | $300 – $800 |
| Chimney liner installation | $3,500 – $7,000 |
How long does a chimney liner last in Silver Lake?
A DuraFlex stainless liner installed in a dry, properly capped Silver Lake chimney should last 20 to 30 years. The biggest threats are not age but moisture and acidic condensate from gas appliances, which is why we size the liner to the appliance and inspect the crown and cap during the same visit.
Can you repair a Silver Lake chimney without tearing down the masonry?
Most of the time, yes. Crown repair, flashing replacement, cap work, and liner installation all happen without touching the visible brick. If brick is spalled or mortar joints are failing, we do targeted repointing rather than rebuild. Demolition is the last option, not the first.
Brands We Service in Silver Lake
We stock and install parts from our brands that the Silver Lake trade knows: DuraFlex liners, Copperfield caps and dampers, and Olympia Chimney components. Because these are professional-trade lines, not retail stock, most common Silver Lake repair parts are available without waiting on a big-box special order.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Silver Lake, CA
| Service | Typical range in Silver Lake |
|---|---|
| Chimney sweep | $180 – $300 |
| Dryer vent cleaning | $120 – $250 |
| Chimney cap installation | $350 – $650 |
| Chimney crown repair | $300 – $800 |
| Chimney flashing repair | $400 – $1,100 |
| Chimney liner installation | $3,500 – $7,000 |
| Gas fireplace service | $150 – $350 |
| Fireplace insert cleaning | $180 – $320 |
Three things push Silver Lake prices toward the higher end of these ranges: hillside roof access, original clay tile flues that require gentler methods, and the extra time a pre-war fireplace takes to inspect properly. We give you a flat price before the work starts, and nothing changes on the invoice unless we find a problem, show it to you on camera, and you approve the additional work in writing first.
Neighborhoods We Serve in Silver Lake
We work throughout the 90026 ZIP and the surrounding hillside streets, from the flats near Sunset to the winding roads above the reservoir. Our Silver Lake schedule covers the whole neighborhood in one or two days a week.
- Silver Lake Heights
- Moreno Highlands
- The Flats (Sunset / Santa Monica)
- Elysian Valley edge
- Ivanhoe / Rowena
Service Area – Cities Near Silver Lake
Ashwood Chimney Sweep serves Silver Lake and the surrounding Los Angeles neighborhoods and cities. We regularly work in Echo Park, CA, Koreatown, CA, and Hollywood, CA, and we take chimney and dryer vent calls across Los Angeles, CA. If your home is in one of these areas, the same crew handles the visit.
Serving Silver Lake, CA — Our Local Coverage Area
We’re based in the Silver Lake area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Silver Lake
Most routine chimney work, including sweeps, cap installation, crown repair, and flashing work, does not require a city permit. Liner installation and any work that changes the flue or the appliance served should be checked against current code. We confirm requirements for your specific job before we start.
Most Silver Lake calls are scheduled within a week. We batch Silver Lake visits to keep the trip efficient, so the exact day depends on how many 90026 jobs are already on the schedule that week. If you need a pre-purchase inspection or have an active animal in the flue, call and tell us; we work those in sooner.
The Ashwood Chimney Sweep technician who answers your questions is the same person who does the work in Silver Lake. We do not hand off chimney or dryer vent jobs to a separate crew. Assessment and repair happen in one visit, by one team.
For a free estimate on any chimney or dryer vent work in Silver Lake, call Ashwood Chimney Sweep at (833) 805-3229.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Silver Lake Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Yolanda Martinez"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Paige Norris"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Ryan Sullivan